Last update 8/4/08

	Nickel Silver Pinbacks		Pinbacks with Bail (Use this pinback as a pin or a pendant)
Catalog # Size Ea. Pkg of 10 PB-160-.750 3/4" $.55 $5.00 PB-160-1.00 1" $.55 $5.00 PB-160-1.25 1-1/4" $.55 $5.00 PB-160-1.50 1-1/2" $.55 $5.00 PB-160-1.75 1-3/4" $.55 $5.00 PB-160-2.00 2" $.55 $5.00		Catalog # Size Finish Ea. Pkg of 10 PBWB-.750 3/4" Y or W* $.55 $5.00 PBWB-1.00 1" Y or W* $.55 $5.00 PBWB-1.25 1-1/4" Y or W* $.55 $5.00 PBWB-1.50 1-1/2" Y or W* $.55 $5.00
Y or W* Yellow gold plate or white gold plate Please indicate which you want.

We also have a limited supply of copper findings

412 Copper Cufflinks Spring Type $0.70 per pair

474 Copper Tie Tack, $0.50 each

Button Covers Stainless Steel $0.40 each

Redi Made Brooch Set

Three piece brooch sets consisting of a bezel with bend-over tabs, back plate with a spot welded bar pin, and a copper disk, ready for enameling. Bezel is nickel-plated brass, back plate is nickel plated steel. Both are 0.020" (0.5mm, 24 B&S gauge) thick. copper disk is 0.031" (0.8mm, 20 B&S guage) thick.

BRO-1 49mm (1.93") disk with slight dome $5.90/set

BRO-2 36mm (1.42") disk with slight dome $5.10/set

BRO-3 45 x 30 mm (1.77" x 1.18") oval disk with slight dome $5.10/set

BRO-4 56x30mm (2.2" x 1.18") obtuse angled flat disk $5.65/set

Sterling Silver Cinch Mount Sets These include the copper insert

One piece sterling silver cinch mounts provide the finished bezel for your cloisonne or minature portrait enamels. Stone the edges, insert into the bezel, squeeze with needle nose pliers. Choose flat or domed copper blanks for BRO-5 and BRO-6. BRO-7 can use either domed copper or SPS-16 silver plated steel blank.

*

BRO-5 40 x 30 mm plain, $3.60 each Order separately 204 flat or D-204 domed copper blank to fit in cinch mount

BRO-6 30 X 22 mm, plain, $3.60 each Order separately 177 flat or D-177 domed copper blank to fit in cinch mount

BRO-7 25 x 18 mm, gallery wire, $4.80 each Order separately D-176 domed copper blank to fit in cinch mount

BRO-8 18 x13 mm SS Cinch Mount, $2.60 each

BRO-11 25mm Round Cinch Mount $3.80 each Purchase either 106 or D-106 to use with this cinch mount

BRO-12 38mm Round Cinch Mount , $5.55 each Purchase 110 or D-110 to insert into cinch mount

BRO-13 21mm Oval Cinch Mount $3.35 each Purchase #179 to insert into cinch mount

Pewter Containers to put your completed work on

Plain round pewter boxes with lids, either satin or bright finish. Wonderful to apply your piece for a finished look. These are not for firing in the kiln, Pewter cannot withstand firing temperatures.

4.5", 3.5", 2.75" and 2" Diameter; choose your finish. We have found that mat finished pieces look great on the satin finish boxes, while the flash fired pieces, look very good on the bright finished boxes.

99-1 Plain Round Box & Lid 2" Dia. Satin Finish $17.50

99-1B Plain Round Box & Lid 2" Dia. Bright Finish $17.50

99-2 Plain Round Box & Lid 2.75" Dia. Satin Finish $22.50

99-2B Plain Round Box & Lid 2.75" Dia. Bright Finish $22.50

99-3 Plain Round Box & Lid 3.5" Dia. Satin Finish $30.00

99-3B Plain Round Box & Lid 3.5" Dia. Bright Finish $30.00

99-4 Plain Round Box & Lid 4.5" Dia. Satin Finish $48.00

99-4B Plain Round Box & Lid 4.5" Dia. Bright Finish $48.00

Plate Stands

Wood Plate Stands to display your work

6" Plate 6" Black Wood Stand $2.25 each

6" Rosewood 6" Rosewood Stand $2.25 each

7" Plate 7" Rosewood Stand $2.50 each

K-1 Furnace Cement. A high temperature airsetting cement powder. Mix with water for hard surface linings, cementing bricks together or repairing furnaces. Add grog or crushed insulating brick to cement mix to patch or repair larger holes in furnace. Sold by the pound. $1.85/lb.

K-2 Porcelain Furnace Wash. Mix with water, apply with brush. To protect furnace shelf and floor from enamel drippings. Sold by the pound. $1.50/lb.

K-3 Heat Resistant Gloves Kevlar™ non-asbestos heat resistant gloves. $27.55/pair

GHS Oberon Gold Heat Reflective Face Shield

Reflects more than 99% of IR and UV radiation. A thin layer of gold (the most efficient reflector of radiant heat know) on the polycarbonate shield reflects radiation while allowing visible light to pass through for clear vision.

Specifications: Abrasion-resistant coating protects the gold layer on the outside, anti-fog coating on the inside. Adjustable ratchet headgear fits a variety of sizes. 8"h x 14"w x 0.080" thick window. $95.40

SG Safety Glasses

Comfortable wraparound frame design offers a panoramic view, increases angular coverage and improves peripheral protection. Fits over most prescription eye wear. Filter shade 3.0 lens absorbs 99.9% of harmful UV rays and protects against Infrared (IR) radiation.

These are low cost and are green in color. You can see around you and still have the protection when firing in the kiln or with a torch. $12.70/ea.

PH-3 Hot Pad. A non asbestos spun ceramic fiber pad for setting hot trivets on 9"x 9 " $5.20ea.

PH-41 Hot Pad a special heat resistant non-asbestos spun ceramic fiber pad. It can be used to protect the floor of the furnace or as a hot pad outside the furnace. 13-1/2" x 13-1/2" x 1/8" $11.65 ea.

TFS Thin Firing Sheet. This is the answer for those who are enameling small, hard to put on a trivet items. It is remarkable in that it does not stick to your enamel, or significantly mar the surface. I have found that it will leave a haze on the enamel surface, noticeable in transparents and dark opaques, not so much so on light colored opaques. Because you are using a flat trivet you would eliminate warpage.

Procedurally you would enamel the back side of your object and then when you are ready to fire the front side, you place this paper on the firing rack or base plate and your piece on top of that. This "paper" looks similar to drawing paper. It is a ceramic impregnated paper and able to withstand firing to 1600 degrees F. It is a one time use paper, so cut the paper to fit your object. (Also you want the minimum amount of paper around your piece to prevent the edges of the paper flying up and marring the front of your piece.) When it is fired it is reduced to a dusty tissue. As with all ceramic fiber material, avoid breathing the residual dust.

The sheets are 20.5" x 20.5" TFS $2.97 ea, TSF-D 12 sheets for $29.70

Ceramic Crucibles. These high fire ceramic crucibles are for use in making your own enamel threads of varying length, thickness and shapes. These are SPECIAL ORDER, expect a 2 week delay,

CRV-1 (Small) 3-1/8" high 2-5/8" top diameter $5.25/ea.

CRV-2 (Large) 4-3/4" high 3-1/4" top diameter $6.35/ea.

Firing Forks. Heavy gauge handling forks.

HF-2120 2" Tine spread x 5-1/2" long $15.50 ea.

HF-2145 4" Tine spread x 5-1/2" long Overall length 36 inches and has a two hand grip $25.70 ea

Scrolling or Swirling Tool (Stainless steel tips) Equipped with protective shield. SC-21 21" long $11.15ea.

K-9 Heavy Duty Firing Fork. Long Firing fork has extra hand gripper for two handle holding of heavy items. 36 inches long. $23.10 ea.

K-10 Spatula. Stainless steel spatula for moving hot trivets (9"length) $7.00 ea.

Torch Holder

Great way to handle using a torch when firing enamels. All you need is a Mapp gas container and the torch head that comes with a short hose, available at hardware stores. You do not have to worry about the tank falling over, nor do you have to fret over where to set the hot torch nozzle when you need to set it down, there is a place for it to stay. If you need two hands to strike the striker, no problem the nozzle can sit in the nozzle holder and wait for you to light it.

Torch Holder $65.00,

Torch Holder with Firing Rack $71.50

 
Press Plates 

Press Plate. Very useful when you need to flatten a piece right out of the kiln. If you need a special

size, custom sizes are available. Please call to order.

WSPP-08 8" Square $40.00 WSPP-12 12" $75.00

Table of Contents Order form

Schlaifer's Enameling Supplies phone or FAX 800 525-5959

email Schlaifer's at ses@enameling.com